Use up to 30% less energy and experience more comfort with precise, consistent temperature control. The Energy Plus in-wall fan-forced electric heater uses an intelligent control and auto-adjusting fan speed to maintain the desired temperature for your room within 1°. Delivering only the heat you need for maximum efficiency. This hard-wired electric heater warms small to medium-sized rooms up to 175 sq. ft.
FEATURES:
- Hard-wired multi-volt fan heater with unique power supply smart sensor takes all the guesswork out of installation by auto-adjusting the heater voltage to match your voltage supply. No need to worry about damaging the heater or whether you have 120-Volt, 208-Volt, or 240-Volt wiring. Before purchasing, confirm your power supply voltage to determine the heater’s output (check your breaker, use a voltmeter, or refer to your old heater’s label if replacing).
- Multi-Volt options: 1,600-Watt output at 240 volts (6.7 Amps, 5,460 BTUs); 1,500-Watt output at 208 volts (7.2 Amps, 5,120 BTUs); 1,000-Watt output at 120 volts (8.3 Amps, 3,412 BTUs)
- Easily update old heaters: uses same wall can as many Cadet Com-Pak series units, so no wall patchwork or additional wall board cut outs should be required
- Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below)
- Space-saving, recess-mount design. Rough-in dimensions: 8 in. W x 10.125 in. H x 4 in. D
- A complete unit including wall can, heater, white grille and built-in digital thermostat
- Smooth, powder coat white paint finish that is resistant to corrosion, scratches and fading
- A high-temperature safety device switches heater off if normal operating temperatures are exceeded
PRODUCT SPECIFICATIONS:
- Brand: Cadet
- Amperage (amps): 8.3 A
- Area Heated (Sq. Ft.): 200
- Color: White
- Fuel Type: Electric
- Wattage (watts): 1600 W
- Voltage (volts): 240 V
- Room Size (sq. ft.): 250-350
